Res. Agr. Eng., 57 (2011)

No. 4

https://doi.org/10.17221/4348-RAE
 
List of reviewers Index of volume 57
Res. Agr. Eng., 57 (2011): I-IIdownload PDF
https://doi.org/10.17221/20/2011-RAE
 
The use of CAN-Bus messages of an agricultural tractor for monitoring its operation
J. Čupera, P. Sedlák
Res. Agr. Eng., 57 (2011): 117-127abstractdownload PDF
https://doi.org/10.17221/16/2011-RAE
 
A novel three-point hitch dynamometer to measure the draft requirement of mounted implements
M. Askari, M.H. Komarizade, A.M. Nikbakht, N. Nobakht, R.F. Teimourlou
Res. Agr. Eng., 57 (2011): 128-136abstractdownload PDF
https://doi.org/10.17221/41/2010-RAE
 
Biogas composition depending on the type of plant biomass used
M. Herout, J. Malaťák, L. Kučera, T. Dlabaja
Res. Agr. Eng., 57 (2011): 137-143abstractdownload PDF
https://doi.org/10.17221/35/2010-RAE
 
Design and development of power operated banana slicer for small scale food processing industries
S.P. Sonawane, G.P. Sharma, A.C. Pandya
Res. Agr. Eng., 57 (2011): 144-152abstractdownload PDF
https://doi.org/10.17221/39/2010-RAE
 
Influence of surface integrity on bonding process
M. Müller
Res. Agr. Eng., 57 (2011): 153-162abstractdownload PDF

No. 3

https://doi.org/10.17221/26/2010-RAE
 
Analysis of force effects measured in the tractor three-point linkage
J. Čupera, F. Bauer, L. Severa, M. Tatíček
Res. Agr. Eng., 57 (2011): 79-87abstractdownload PDF
https://doi.org/10.17221/0/2010-RAE
 
An analysis of energy use, input costs and relation between energy inputs and yield of apple orchard
R. Fadavi, A. Keyhani, S.S. Mohtasebi
Res. Agr. Eng., 57 (2011): 88-96abstractdownload PDF
https://doi.org/10.17221/25/2010-RAE
 
Ambient temperature kinetic assessment of biogas production from co-digestion of horse and cow dung
M.O.L. Yusuf, A. Debora, D.E. Ogheneruona
Res. Agr. Eng., 57 (2011): 97-104abstractdownload PDF
https://doi.org/10.17221/36/2010-RAE
 
Change of mechanical properties in substrate during rewelding deposit
R. Chotěborský, P. Hrabě, A. Kabutey
Res. Agr. Eng., 57 (2011): 105-109abstractdownload PDF
https://doi.org/10.17221/38/2010-RAE
 
A mathematical model for predicting the cracking efficiency of vertical-shaft centrifugal palm nut cracker
M.C. Ndukwu, S.N. Asoegwu
Res. Agr. Eng., 57 (2011): 110-115abstractdownload PDF

No. 2

https://doi.org/10.17221/28/2010-RAE
 
Heat-emission analysis of small combustion equipments for biomass
J. Malaťák, L. Passian
Res. Agr. Eng., 57 (2011): 37-50abstractdownload PDF
https://doi.org/10.17221/24/2010-RAE
 
Sensors connection for yield determination on round balers with variable chamber
M. Kroulík, J. Mašek, Z. Kvíz, B. Jošt, V. Prošek
Res. Agr. Eng., 57 (2011): 51-55abstractdownload PDF
https://doi.org/10.17221/19/2010-RAE
 
Effects of MIG process parameters on the geometry and dilution of the bead in the automatic surfacing
R. Chotěborský, M. Navrátilová, P. Hrabě
Res. Agr. Eng., 57 (2011): 56-62abstractdownload PDF
https://doi.org/10.17221/29/2010-RAE
 
Technical-economical indicators in the sugar beet transportation management
M. Žitňák, M. Korenko
Res. Agr. Eng., 57 (2011): 63-71abstractdownload PDF
https://doi.org/10.17221/15/2010-RAE
 
Behaviour of different moisture contents of Jatropha curcas L. seeds under compression loading
A. Kabutey, D. Herák, A. Sedláček
Res. Agr. Eng., 57 (2011): 72-77abstractdownload PDF

No. 1

https://doi.org/10.17221/2818-RAE
 
LIST OF REVIEWERS 2010
Res. Agr. Eng., 57 (2011): -download PDF
https://doi.org/10.17221/18/2010-RAE
 
Measurements of tractor power parameters using GPS
M. Pexa, M. Cindr, K. Kubín, V. Jurča
Res. Agr. Eng., 57 (2011): 1-7abstractdownload PDF
https://doi.org/10.17221/13/2010-RAE
 
Threshing force of paddy as affected by loading manner and grain position on the panicle
M.R. Alizadeh, A. Allameh
Res. Agr. Eng., 57 (2011): 8-12abstractdownload PDF
https://doi.org/10.17221/12/2010-RAE
 
Tangent curve utilization for description of mechanical behaviour of pressed mixture
D. Herák, A. Kabutey, A. Sedláček, G. Gűrdil
Res. Agr. Eng., 57 (2011): 13-18abstractdownload PDF
https://doi.org/10.17221/14/2010-RAE
 
Drying sage (Salvia officinalis L.) in passive solar dryers
A.A. Hassanain
Res. Agr. Eng., 57 (2011): 19-29abstractdownload PDF
https://doi.org/10.17221/16/2010-RAE
 
Content changes of adsorbable organically bound halogens during sludge centrifugation and drying
K. Hrich, B. Groda
Res. Agr. Eng., 57 (2011): 30-36abstractdownload PDF

Special Issue

https://doi.org/10.17221/54/2010-RAE
 
Analysis of the relations between some physicalindicators of market eggs  
R. Gálik, Z. Poláková, Š. Boďo, M. Denker
Res. Agr. Eng., 57 (2011): S1-S6abstractdownload PDF
https://doi.org/10.17221/6/2011-RAE
 
Using satellite navigation for seeding of wide-row and narrow-row crops  
M. Macák, M. Žitňák, L. Nozdrovický
Res. Agr. Eng., 57 (2011): S7-S13abstractdownload PDF
https://doi.org/10.17221/47/2010-RAE
 
Evaluation of efficiency of precision irrigation for potatoes  
J. Jobbágy, J. Simoník, P. Findura
Res. Agr. Eng., 57 (2011): S14-S23abstractdownload PDF
https://doi.org/10.17221/55/2010-RAE
 
Drying medium – modelling and process evaluation  
I. Vitázek, J. Havelka
Res. Agr. Eng., 57 (2011): S24-S29abstractdownload PDF
https://doi.org/10.17221/58/2010-RAE
 
Comparison of numerical integration methods in strapdown inertial navigation algorithm  
V. Cviklovič, D. Hrubý, M. Olejár, O. Lukáč
Res. Agr. Eng., 57 (2011): S30-S34abstractdownload PDF
https://doi.org/10.17221/51/2010-RAE
 
Operating parameters and emission evaluation of tractors running on diesel oil and biofuel  
D. Müllerová, M. Landis, I. Schiess, J. Jablonický, M. Prístavka
Res. Agr. Eng., 57 (2011): S35-S42abstractdownload PDF
https://doi.org/10.17221/7/2011-RAE
 
The comparison of biodegradable hydraulic fluid with mineral oil on the basis of selected parameters  
R. Majdan, J. Kosiba, J. Tulík, D. Kročková, V. Šinský
Res. Agr. Eng., 57 (2011): S43-S49abstractdownload PDF
https://doi.org/10.17221/57/2010-RAE
 
Influence of welding method on microstructural creation of welded joints  
P. Čičo, D. Kalincová, M. Kotus
Res. Agr. Eng., 57 (2011): S50-S56abstractdownload PDF
https://doi.org/10.17221/48/2010-RAE
 
Measurement of titanium surface roughness created by non-conventional cutting technology  
J. Rusnák, M. Zeleňák, J. Valíček, M. Kadnár, S. Hloch, P. Hlaváček, M. Kušnerová, R. Čep, J. Kadnár
Res. Agr. Eng., 57 (2011): S57-S60abstractdownload PDF
https://doi.org/10.17221/21/2011-RAE
 
Material machining for friction knots of moving parts for agricultural machines  
J. Žitňanský, J. Žarnovský, R. Mikuš, I. Kováč, Z. Andrássyová
Res. Agr. Eng., 57 (2011): S61-S68abstractdownload PDF
https://doi.org/10.17221/49/2010-RAE
 
Shadow method for the evaluation of surface created by hydroabrasive dividing of materials  
J. Valíček, M. Kadnár, P. Hlaváček, J. Rusnák, S. Hloch, M. Zeleňák, M. Řepka, M. Kušnerová, J. Kadnár
Res. Agr. Eng., 57 (2011): S69-S73abstractdownload PDF
https://doi.org/10.17221/56/2010-RAE
 
Analysis of wear resistent weld materials in laboratory conditions  
M. Kotus, Z. Andrássyová, P. Čičo, J. Fries, P. Hrabě
Res. Agr. Eng., 57 (2011): S74-S78abstractdownload PDF

© 2023 Czech Academy of Agricultural Sciences | Prohlášení o přístupnosti